Conversion To Individual Tubing/Central Tubing - Festo CPV-VI Series Manual

5. Maintenance and conversion
5.6

Conversion to individual tubing/central tubing

Festo P.BE-CPV-EN en 0005e
In order to convert your CPV valve terminal from individual
tubing to tubing on the pneumatic multipin, you will require:
– the pneumatic multipin
– special end plates for the CPV valve terminal
Proceed as follows
S
Change the end plates of the CPV valve terminal as de-
scribed in the section "Converting the end plates".
S
Fit the pneumatic multipin as described under "Fitting the
pneumatic multipin" in chapter 2.
5-21