2. Fitting
2.1
CPV valve terminal with individual tubing
Festo P.BE-CPV-EN en 0005e
Warning
Switch off the following before undertaking installation
and/or maintenance work:
S the compressed air supply
S the power supply for the valve solenoid coils
You can thereby avoid:
–
sudden uncontrolled movements of loose tubing
–
unexpected movements of the connected actuators
–
non-defined switching states of the electronic compo-
nents.
Fitting variants
The CPV valve terminal with individual tubing can be fitted
into a system or machine in one of the following methods:
–
fitting onto a wall
–
fitting onto a hat rail
–
fitting on the floor
Please note
If vibrations occur which exceed the following values:
– 0.15 mm path at 10-58 Hz
– 2 g acceleration at 58-150 Hz
use the wall or floor fittings for the CPV14 or CPV18 valve
terminals.
2-3