Fitting On The Floor - Festo CPV-VI Series Manual

2. Fitting

2.1.3 Fitting on the floor

2-12
In order to fit the CPV valve terminal onto the floor (fitting at
the level of work connections 2 and 4), you will require the
following fastening screws:
– 4 M4x45 socket head screws (CPV10)
– 4 M4x50 socket head screws (CPV14)
– 4 M6x65 socket head screws (CPV18)
Proceed as follows:
S
Prepare the fastening surface. If necessary, make a suit-
able bracket. The diagram below shows the position of
and the distances between the fastening holes on the
CPV valve terminal.
1
2
CPV10 CPV14
Valve terminal Valve terminal
1
53 mm 66 mm
2
4 mm 5 mm
3
10 mm x number of 14 mm x number of
plates plates
Fig. 2/6: Position of the fastening holes
3 2
CPV18
Valve terminal
87 mm
8.1 mm
18 mm x number of
plates
Festo P.BE-CPV-EN en 0005e