Conversion From Non-Locking To Locking Manual Override - Festo CPV-VI Series Manual

5. Maintenance and conversion
5.3

Conversion from non-locking to locking manual override

1
1
Remove the safety clip by pressing it
out.
Fig. 5/6: Safety clip for the manual override
Festo P.BE-CPV-EN en 0005e
By removing a safety clip, you can convert your CPV valve
terminal from non-locking to locking manual override. Pro-
ceed as follows
If you do not wish to re-use the safety clip:
S
use a screwdriver to press in the centre of the safety clip,
as shown under 1. The safety clip will then bend and
snap out of the support.
If you wish to re-use the safety clip:
S
use a thin object (e. g. a spatula) to lift the safety clip out
of the support, as shown in 2.
2
2
Removing the safety clip by lifting it
out (clip can be re-used)
5-17