3. Installation
3.3
Connecting the MPA−F valve terminal
3−10
In the case of manifold blocks fitted with cover plates, seal
the work connections (2 or 4) with blanking plates or
threaded blanking plugs to prevent dirt from entering.
Connections on the following components are available for
supplying the valve terminal:
Port (1):
On the electrical interface(Pneumatic interface, CPI−inter
face, multiple connector plate, AS−interface)
On the optional pneumatic air supply plate, at a maximum
between every manifold block
Port (12/14):
On the right−hand end plate
Festo P.BE−MPAF−EN en 0804NH