Configuring The Target Extension Number - Yealink T48S Skype For Business Edition User Manual

User Guide for the T48S Skype for Business phone
Intercom Barge
You can enable or disable the phone to automatically answer an incoming intercom call while
there is already an active call on the phone. If Intercom Barge is enabled, the phone will
automatically answer the intercom call and place the active call on hold. If Intercom Barge is
disabled, the phone will handle an incoming intercom call like a waiting call. Intercom Barge is
disabled by default.
Note
To enable the phone to receive a new incoming call when it has an active call, make sure that call
waiting feature is enabled on the phone in advance. For more information, refer to
the Call Waiting
To configure the intercom feature:
Tap Menu->Setting->Features->Intercom.
1.
Select the desired value.
2.
Tap to accept the change.
3.
Intercom features are configurable via web user interface at the path Features->Intercom.

Configuring the Target Extension Number

You need to configure the target extension number for outgoing intercom calls after you
enable the intercom feature.
To configure the target extension number via phone user interface:
Do one of the following to enter the intercom list:
1.
Tap
-
Tap Menu->Setting->Features->Intercom List.
-
Select a desired item.
2.
The default tag is Empty if it is not configured before.
Tap the Edit soft key.
3.
188
on page 111.
.
Configuring