Wi-Fi is a popular wireless networking technology that uses radio waves to provide wireless High speed Internet and network connections. You can activate/deactivate the Wi-Fi mode on your Yealink T48S IP phone, and then connect your phone to the desired wireless network Connect the Wi-Fi Dongle 1.
5. Tap the desired wireless network to connect to your IP phone. after the desired wireless network, and then tap Connect 6. You can also tap To manually connect to a wireless network via phone user interface: Optus Loop – Wireless Settings Yealink T48S QRG...
Page 4
Once the connection has completed successfully, the prompt Connect Successfully! appears at the end of the wireless network The Wi-Fi icon appears on the touch screen Note: For more information on the password of the wireless network, contact your system administrator Optus Loop – Wireless Settings Yealink T48S QRG...
WPS can automatically configure a wireless network with a network name (SSID) and strong WPA data encryption and authentication. Two methods supported by Yealink IP phones in the Wi-Fi protected setup: • Push Button Configuration (PBC): The user simply has to press WPS key on both the IP phone and gateway/router to connect.
To view the wireless network information via phone user interface: > Basic > Wi-Fi 1. Tap the Menu soft key 2. Tap after the desired wireless network to view the detailed wireless network information (e.g., Profile Name, SSID or Signal Strength) Optus Loop – Wireless Settings Yealink T48S QRG...
To manage the known network(s) via phone user interface: 1. Tap the Menu soft key > Basic > Wi-Fi 2. Tap Known Network(s) to view the saved wireless networks 3. Tap Optus Loop – Wireless Settings Yealink T48S QRG...
3. Tap Disconnect. 4. Tap Known Network(s) 5. Tap the connected wireless network. 6. The wireless network is disconnected. To connect it to your IP phone again, tap the wireless network again Optus Loop – Wireless Settings Yealink T48S QRG...
To deactivate the Wi-Fi mode via phone user interface: > Basic > Wi-Fi 1. Tap the Menu soft key 2. Tap the Off radio button in the Wi-Fi field 3. The Wi-Fi icon disappears from the touch screen Optus Loop – Wireless Settings Yealink T48S QRG...