To configure multicast listening addresses via web user interface:
Click on Directory->Multicast IP.
1.
Select the desired value from the pull-down list of Paging Barge.
2.
Select the desired value from the pull-down list of Paging Priority Active.
3.
Enter the multicast IP address(es) and port number (e.g., 224.5.6.20:10008) which the
4.
phone listens to for incoming RTP multicast in the Listening Address field.
Enter the label in the Label field.
5.
Label will appear on the touch screen when the phone receives the multicast RTP stream.
Click Confirm to accept the change.
6.
Note
The priorities of listening addresses are predefined: 1 is with the highest priority, while 10 is with
the lowest.
Multicast listening addresses are configurable via web user interface only.
Using Multicast Paging
To send RTP stream via the paging list:
Do one of the following to send RTP stream:
1.
When the phone is idle, tap
-
During a call, tap
-
or tap Menu->Setting->Features->Paging List.
->
.
Advanced Phone Features
193