The Run automatically when starting Windows checkbox and Wired checkbox are
checked by default.
If you uncheck the Wired checkbox, you can click ResetIP to clear the current IP address,
and then enter the IP address of your phone manually.
Click Export Log(C) to export the log file of Yealink BToE Connector, and then save the
file to your local system.
Click about (A) to view the information of Yealink BToE Connector.
Click Exit(E) to exit Yealink BToE Connector.
Pairing Your Phone with Your Computer
There are two BToE Pairing modes on the phone. If BToE Pairing Mode is Auto, your phone
will pair with your computer directly without a pairing code. If BToE Pairing Mode is Manual,
you need to use a pairing code generated by your phone to manually pair your phone with
your computer.
To configure BToE feature via phone user interface:
Tap Menu->Setting->Features->BToE.
1.
Select Enabled from the pull-down list of BToE.
2.
Select the desired value from the pull down-list of the BToE Pairing mode.
3.
The default value is Auto.
Tap
to accept the change.
4.
Advanced Phone Features
211