Privacy Mode - Yealink T48S Skype For Business Edition User Manual

User Guide for the T48S Skype for Business phone
Select a desired paging group.
2.
Tap the Paging soft key or the desired paging group or press
3.
Both the sender's and receiver's phones play a warning tone and the receiver
automatically answers the multicast RTP session in the speakerphone mode.
Your can do the following:
4.
To place the current multicast RTP session on hold, press
-
The sender's phone places the multicast RTP session on hold and receiver's phone
releases the session.
- To resume the held multicast RTP session, press
The multicast RTP session is established again.
- To end the multicast RTP session, tap
Note
Multicast RTP is one way only from the sender to the multicast address(es) (receiver). For
outgoing RTP multicasts, all other existing calls on the phone will be placed on hold.

Privacy Mode

Privacy mode allows you to restrict your presence information, so that it is visible only to the
contacts in your Skype for Business directory.
Note
Microsoft Active Directory includes all Skype for Business users configured by the system
administrator. You can add them as your Skype for Business contacts. For more information on
how to add Skype for Business contacts, refer to
82.
When the privacy mode is disabled on the Skype for Business Server, you can see the following
two options available on the phone/Skype for Business client:
Everyone Can See My Status Regardless Of System Settings/I want everyone to be

able to see my presence regardless of system settings (override default settings):
Everyone in my Microsoft Active Directory Domain can see my presence regardless of
system settings.
Only Contacts Can See My Status If System Setting/I want the system administrator

to decide: Currently everyone can see my presence but this could be change in the future.
When the privacy mode is enabled on the Skype for Business Server, you can see the following
two options available on the phone or Skype for Business client:
Everyone can see my status/I want everyone to be able to see my presence: Everyone

in my Microsoft Active Directory Domain can see my presence.
Only contacts can see my status/I only want people in Contacts to see my presence:

194
to send RTP.
or tap
or tap
.
Adding Skype for Business Contacts
.
.
on page