Yealink T48S Skype For Business Edition User Manual page 235

Connecting to the Wireless Network Using Wi-Fi Protected Setup (WPS)
Wi-Fi Protected Setup (WPS) provides simplified mechanisms to configure secure wireless
networks which can automatically configure a wireless network with a network name (SSID) and
strong WPA data encryption and authentication.
Two methods supported by Yealink IP phones in the Wi-Fi protected setup:
Push Button Configuration (PBC): The user simply presses WPS key on both the IP

phone and gateway/router to connect.
Personal Identification Number (PIN): The user has to enter a PIN generated randomly

by the IP phone on the gateway/router to connect.
Push Button Configuration (PBC)
To connect to the wireless network using PBC method:
Tap Menu->Setting->Basic->Wi-Fi.
1.
Activate the Wi-Fi mode (refer to
2.
Tap the WPS soft key.
3.
The touch screen prompts "WPS has opened, please connect in 120s!".
Long press the WPS key on your gateway/router.
4.
Once WPS setup has completed successfully, the touch screen will prompt "Connect
Success.".
Personal Identification Number (PIN)
To connect to the wireless network using PIN method:
Tap Menu->Setting->Basic->Wi-Fi.
1.
Activate the Wi-Fi mode (refer to
2.
Tap the WPS-PIN soft key.
3.
The touch screen prompts "Please input below PIN code on your WIFI router and press OK
to start connecting: xxx".
Log into your gateway/router's web interface, and configure it to search the clients. For
4.
more information, refer to the documentation from the gateway/router manufacturer.
Once WPS-PIN setup has completed successfully, the gateway/router's web interface will
prompt success.
Note Contact your gateway/router provider for more information.
Adding a Wireless Network manually
If your gateway/router has SSID broadcast disabled, it might not appear in the scanning results.
In that case, you must manually add a wireless network.
Using Optional Accessories with Your Phone
Activating the Wi-Fi Mode).
Activating the Wi-Fi Mode).
233