Key Tone - Yealink T48S Skype For Business Edition User Manual

User Guide for the T48S Skype for Business phone
Uploading a Custom Ringtone
To set the custom ring tones, you need to upload the custom ring tones to the phone in
advance. The ring tone format must meet the following:
Format
.wav
The ring tone file must be in PCMU/PCMA audio format, mono channel, 8K sample rate and 16
Note
bit resolution.
To upload a custom ringtone for the phone via web user interface:
Click on Settings->Preference.
1.
In the Upload Ringtone field, click Browse... to locate a ringtone file (the file format must
2.
be *.wav) from your local system.
Click Upload to upload the file.
3.
The custom ringtone appears in the pull-down list of Ring Type.
Note
The priority of ring tone for an incoming call on the phone is as follows: a boss/delegate
ringtone (refer to
Contacts) >Phone ringtone

Key Tone

If you enable key tone, the phone will produce a sound when you press the keypad.
To configure key tone via phone user interface:
Tap Menu->Setting->Basic->Sounds->Key Tone.
1.
80
Total File Size
<=8MB 2MB of space should be reserved for the phone.
Boss-Line Ringtone)>Contact ringtone (refer to
.
Note
Adding Local