Call waiting tone is configurable via web user interface at the path Features->Audio->Call
Waiting Tone.
Ending Calls
To end a call:
Do one of the following:
If you are using the handset, press
-
-
If you are using the headset, press
If you are using the speakerphone, press
-
Note
When a call is placed on hold, you cannot press
the call, and then press
Call Mute
You can mute the microphone of the active audio device during an active call, and then the
other party cannot hear you. Call mute applies to all modes (Handset, Headset and
Speakerphone).
To mute a call:
Press
1.
The touch screen indicates that the call is muted. The mute key LED glows red when the
call is muted.
To un-mute a call:
Press
1.
to end it.
during an active call.
again to un-mute the call.
, hang up the handset or tap
or tap
.
or
, or tap
to end it. You should tap
Basic Call Features
.
.
to resume
113