Yealink T48S Skype For Business Edition User Manual page 67

Enter the starting time and ending time respectively in the desired day field.
2.
Click Confirm to accept the change.
3.
Configuring the Idle Timeout
Idle Timeout specifies the period of time before the phone enters power-saving mode. The
following three types of idle timeout you can configure:
Office Hours Idle TimeOut: Configures the idle timeout for office hours.

Off Hours Idle TimeOut: Configures the idle timeout for non-office hours.

User input extension Idle TimeOut: Configures idle timeout that applies after you use

the phone (for example, press a key on the phone or pick up/hang up the handset). You
can choose to set a higher User Input Extension Idle TimeOut than the Office Hours Idle
TimeOut and Off Hours Idle TimeOut so that when you're actively using the phone,
power-saving mode doesn't initiate too frequently.
By default, the Office Hours Idle Timeout is much longer than the Off Hours Idle TimeOut. If
you use the phone, the idle timeout that applies (User Input Extension Idle Timeout or Office
Hours/Off Hours Idle TimeOut) is the timeout with the highest value. If the phone has an
incoming call or new message, the User Input Extension Idle TimeOut is ignored.
To configure the idle timeout via web user interface:
Click on Settings->Power Saving.
1.
Enter the desired value between 1 and 960 (minutes) in the Office Hours Idle TimeOut
2.
field.
Enter the desired value between 1 and 10 (minutes) in the Off Hours Idle TimeOut field.
3.
Customizing Your Phone
65