Yealink T48S Skype For Business Edition User Manual page 224

User Guide for the T48S Skype for Business phone
Connecting a YHS32/YHS33 Headset
To connect a YHS32/YHS33 headset
Simply insert the modular connector into the headset port on the back of your phone.
1.
For the information on how to connect headset YHS32/YHS33, refer to the user guide on
the specific headset's support page on
If both a Bluetooth headset and an analog headset are connected, only the Bluetooth headset
Note
can be used.
Activating the Headset Mode
After connecting a headset to your phone, you can activate the headset mode and use headset
when answering and placing calls.
To activate the headset mode:
Press the HEADSET key on the phone.
1.
The HEADSET key LED glows green.
When you tap
automatically. For more information on using the headset to answer a call, refer to
Answering Calls
With the handset on-hook, enter the desired number and tap
place a call using the headset automatically. For more information on using the headset to
place a call, refer to
Deactivating the Headset Mode
If you don't want to use a headset when handling calls, you can deactivate the headset mode.
To deactivate the headset mode:
Press the HEADSET key again on the phone.
1.
The HEADSET key LED goes out.
Enabling the Headset Prior
You can use headset in priority when receiving or placing calls. This feature is especially useful
for permanent or full-time headset users. To use this feature, you need to enable headset prior
feature in advance.
To enable the headset prior:
Click on Features->General Information.
1.
222
Yealink Technical Support
to answer an incoming call, the call is connected in headset mode
on page 109.
Placing Calls on page 106.
.
, the phone will then