Setting The Field Bus Protocol - Festo CP-FB5-E Manual

1. Installation

1.2.3 Setting the field bus protocol

DIL switch
Fig. 1/5: Settings with hardware status 06/97 or later
DIL switch
Fig. 1/6: Settings with hardware status 05/97 or earlier
1-10
Set the desired field bus protocol on DIL switch elements
3...6. First check to see which hardware status you are using
(see type plate).
Settings with hardware status 06/97 or later
Festo field bus
Settings with hardware status 05/97 or earlier
Festo field bus
ABB CS31 Moeller SUCOnet K
ABB CS31 Moeller SUCOnet K
Festo P.BE-CP-FB5-E-EN en 0112a