Festo CP-FB5-E Manual page 21

1. Installation
1.2.2 Setting the field bus baud rate
Setting the field bus baud rate (in kBaud) with Festo protocol
DIL switch 31,25
Fig. 1/4: Setting the field bus baud rate with Festo protocol
Festo P.BE-CP-FB5-E-EN en 0112a
Please note
The desired baud rate need only be set with the Festo pro-
tocol.
With the protocols SUCOnet K and CS31, baud rate identifi-
cation is made automatically.
If you are using the Festo protocol, set the desired field bus
baud rate on switch elements 1 and 2.
62,5 187,5 375
1-9