Addressing - Festo CP-FB5-E Manual

2. Commissioning

2.2.2 Addressing

Addressing inputs/out-
puts
Example
2-6
Please note
The CP system can be addressed byte-by-byte via the
Festo field bus.
Note the differences from the word-by-word addressing of
other field bus slaves.
The following example shows the addressing of the inputs/
outputs with 3 assigned strings (field bus address of CP
system: 3).
Master:
Configuration with FST200:
Field bus address of CP system:
Festo SF3
6 IW and 6 OW
3
Festo P.BE-CP-FB5-E-EN en 0112a