Festo CP-FB5-E Manual page 17

1. Installation
Dual inline switch
DIL switch Switch
(factory set- element
ting)
1
2
3
4
5
6
Festo P.BE-CP-FB5-E-EN en 0112a
Set the following functions on the DIL switch:
– the field bus protocol
– the field bus baud rate ( only required with Festo proto-
col)
Description of function
Festo protocol:
– Field bus baud rate
see Setting the field bus see "Setting the field bus
baud rate"
Field bus protocol
see "Setting the field bus protocol" see "Setting the field bus protocol"
ABB CS31 or SUCOnet K:
– Switch setting without mean-
ing; any desired position ing; any desired position
1-5