1. Installation
1.1
General instructions
Festo P.BE-CP-FB5-E-EN en 0112a
Warning
Before undertaking installation and maintenance work,
switch of the following:
S the compressed air supply
S the operating voltage at the field bus node (pins 1 and 2)
S the operating voltage at the CP output modules
You thereby avoid:
–
uncontrolled movements of loose tubing
–
undesired movements of the connected actuators
–
undefined switching states of the electronic components
Caution
The node of the CP system contains electrostatically
vulnerable components.
S Do not therefore touch any components.
S Observe the regulations for handling electrostatically
vulnerable components.
You thereby avoid damage to the electronic components of
the node.
General information on installing CP modules can be found in
the manual "CP system."
1-3