1. Installation
1.1 General instructions
WARNING
Before undertaking installation and maintenance
work, switch off the following:
• the compressed air supply
• the operating voltage for the field bus
• the operating voltage for the CP output modules
You thereby avoid:
– uncontrolled movements of loose tubing
– unintentional movements of the connected actuators
– undefined switching states of the electronic
CAUTION
The node of the CP system contains electrostatically
sensitive components.
• Do not, therefore, touch any components.
• Observe the regulations for handling
You can therefore prevent damage to the electronic
components on the node.
General information on installing the CP components
can be found in the "CP system" manual.
CP FB8-E 9809a
node (pins 1 and 2)
components
electrostatically sensitive components.
1-3