Assembly Instructions; Assembling Controllers; Allen Bradley - Festo EduTrainer Manual

2 Assembly instructions

2.1 Assembling controllers

Caution
Controllers or extension modules must not be disassembled from the H-rail in wired condition. Remove
all cable connections before disassembling a controller or extension module.

2.1.1 Allen Bradley

– Assembly:
1. Hook he upper groove onto the H-rail.
2. Press the controller downwards and simultaneously against the H-rail until the mounting latch
engages. Make sure that the two mounting latches are in the upper (secured) position.
– Disassembly:
1. Insert a flat-blade screwdriver in the mounting latch on the underside of the controller.
2. Hold the controller and lever the mounting latch downwards. The latch remains in the open
position. Repeat the process for the second mounting latch. You can now remove the controller
from the H-rail.
Note
Further information on assembling or disassembling the controller or individual extension modules can
be found in the manuals of the respective controller manufacturers.
© Festo Didactic GmbH & Co. KG 739319
43