Seat Toledo 2014 Owner's Manual page 172

170 Driving the vehicle with a trailer
Verification of correct placement
Before using the ball-headed bar, ensure it is correctly fitted.
Ensure that:
● The ball-headed bar does not come out of the clamping bush with a
strong "shake".
⇒ F ig. 119
● The red mark
A
white mark on the ball-headed bar.
● The manual regulator is adjusted to the ball-headed bar, with no space
between them.
● The regulator is locked and the key has been removed.
● Cover has been placed over the manual regulator lock.
B
WARNING
Only use the towing bracket device when the ball-headed bar is properly
fitted!
Fig. 119 Correct place-
ment of the ball-headed
bar
on the manual regulator signals towards the
Disassembly of the ball-headed bar
Fig. 120 Remove the key slot cover/unlock
– Remove cover from over the regulator key slot in the direc-
A
⇒ F ig.
tion of arrow
1
– Insert key in the key slot.
B

– Open the manual regulator lock by turning key
left in the direction of arrow
the "unlocked" symbol.
Fig. 121 Unblock the
ball-headed bar
120.
fully to the
B
. The arrow on the key points to
2
