Seat Toledo 2014 Owner's Manual page 227

– Extract the bulb and fit the replacement so that the lug on the
base fits into the recess on the reflector.
– Fit the connector.
– Fit the protective cover. Make sure that the cover fits correctly
on the housing during the operation.
– Replace the wheel housing cover.
– Check whether the new bulb is working.
Changing turn signal light bulbs
– Raise the bonnet.
– Turn the bulb holder
it.
– Remove the bulb by pressing on the bulb holder and turning it
anti-clockwise at the same time.
Safety First
Fig. 157 Changing turn
signal light bulbs
⇒ F ig. 157
anti-clockwise and remove
1
Operating instructions
– Fit the replacement bulb in the bulb holder and turn clockwise
as far as it will go.
– Check whether the new bulb is working.
Changing daytime driving light bulbs

– Raise the bonnet.
⇒ F ig. 158
– Turn the bulb holder
it.
– Remove the bulb by pressing on the bulb holder and turning it
anti-clockwise at the same time.
– Fit the replacement bulb in the bulb holder and turn clockwise
as far as it will go.
– Check whether the new bulb is working.
Practical Tips
Fuses and bulbs
Fig. 158 Changing day-
time driving light bulbs
anti-clockwise and remove
1
Technical specifications
225

