Fitting rear light
– Make sure the connector is correctly in place.
– Press the rear light unit backwards (driving direction) by fitting
the fastenings into the rubber mountings
– Take the screwdriver or a Torx 20 key (T20) from the vehicle tool
kit and tighten (turning clockwise
screws that secure the front of the light.
Safety First
Fig. 166 Fitting tail light
unit
Fig. 167 Fitting tail light
unit
⇒ F ig. 166
.
A
⇒ F ig.
167) the two retaining
Operating instructions
Practical Tips
Fuses and bulbs
Technical specifications
229