Seat Toledo 2014 Owner's Manual page 65

– Turn the right thumbwheel of the multifunction steering wheel
⇒ F ig.
35. This displays the multifunction display functions
1
in consecutive order on the screen.
Resetting
– Select the required memory.
Depending on the equipment:
– Press and hold the lever's
– Press and hold the right thumbwheel of the multifunction steer-
⇒ F ig.
ing wheel 
1
This will reset the following values of the selected memory:
● the average fuel consumption
● journey distance covered
● average speed
● duration of the journey
Multifunction display data
Outside temperature
The display indicates the outside temperature.
At temperatures below +4 °C (+39 °F), the snowflake symbol is also dis-
played (frozen road surface warning symbol) and an audible warning is giv-
en. Pressing the lever's rocker switch
1)
The indication of consumption is given in kms (miles)/litres in models for certain countries.
2)
The indication of the consumption when the vehicle is stationary is given in - -.- kms/litre
in models for certain countries.
Safety First
⇒ F ig. 34
button.
B
35.
⇒ F ig. 34
or turning the right
A
Operating instructions
thumbwheel of the steering wheel
function.
Journey duration
The display shows the time you have covered since the memory was last re-
set. If you wish to measure the duration of a journey from a specific mo-
ment, the memory must be deleted ⇒ p age 62.
The maximum time indicated by the two memories is 19 hours 59 minutes
or 99 hours and 59 minutes for vehicles fitted with an informative display.
The memory is reset if this value is exceeded.
Current fuel consumption
The current fuel consumption is indicated on the display in litres/100km
1)
(miles) . You can adapt your driving style to the required consumption with
the assistance of this indicator.
The consumption is displayed in litres per hour while the vehicle is stopped
2)
or at idling speed .
Average fuel consumption

The display shows the average fuel consumption in litres/100km (miles)
calculated since the memory was last reset ⇒ p age 61.
If you wish to measure the average fuel consumption from a specific period,
the memory must first be deleted ⇒ p age 62. While driving the first 300 m
after deleting the memory this value is not shown on the display.
The value is updated regularly while the vehicle is in motion.
Practical Tips
Controls and displays
⇒ F ig. 35
shows the last displayed
1
Technical specifications
63
1)
