Vehicle Tool Kit; Changing A Wheel - Seat Toledo 2014 Owner's Manual

Vehicle tool kit*

Fig. 137 Vehicle tool kit
The vehicle tool kit and the jack are stored in a box on the spare wheel or in
the spare wheel well. There is also enough space for the towing bracket ball
coupling. The box is strapped to the spare wheel with tape.
The vehicle tool kit includes the following parts (depending on equipment):
Screwdriver
1
Adapter for anti-theft wheel bolts
2
Towline anchorage
3
Wire hook for removing hub caps
4
Jack
5
Box spanner for wheel bolts
6
Clip for wheel bolt cover
7
Spare set of bulbs
8
Before stowing the jack again, screw down the arm as far as it will go.
Safety First Operating instructions
WARNING
● The factory-supplied jack is only designed for changing wheels on
this model of vehicle. On no account attempt to use it for lighting heavier
vehicles or other loads. Risk of injury!
● Make sure that the vehicle tools are stored properly in the luggage
compartment.
Note
Make sure the box always remains strapped to the spare wheel with tape.

Changing a wheel

Introduction
WARNING
● If you have a puncture in moving traffic, switch on the hazard warning
lights and place the warning triangle at the obligatory distance. Observe
the applicable local legal regulations. This is for your own safety and that
of other road users.
● If you have a flat tyre, stop the vehicle well away from moving traffic.
Choose a location that is as level and solid as possible.
● If you have to change the tyre on a gradient, block the wheel opposite
the wheel being changed by placing a stone or similar object under it to
prevent the vehicle from rolling away unexpectedly.
● If the vehicle has been fitted with tyres or alloys that are different to
those fitted in manufacture, the instructions ⇒ p age 198, Replacing tyres
and wheels must be followed.
Practical Tips
Self-help


Technical specifications
207