Seat Toledo 2014 Owner's Manual page 116

114 Seats and storage
Folding
– Before folding the rear seats, adjust the position of the front
seats so that they cannot be damaged by the rear seats
– Insert the seat belt latch plate into hole
the corresponding side of the vehicle – safety position.
– Press the lock button
wards.
Returning to the initial position
– Where the head restraint has been removed, insert it into the
backrest when partially raised.
– Push the backrest backwards to its original position until the
lock button engages – check that it is locked by pulling on the
backrest ⇒ .
– Make sure the red protruding part
WARNING
● Once the backrests have been lifted, the seat belts and their buckles
must be in their initial position – ready for use.
● The backrests must be safely locked to ensure any items in the lug-
gage compartment cannot move around the interior of the vehicle in the
event of a sudden braking manoeuvre. Risk of injuries!
● Make sure the rear backrests are correctly locked. Only then will the
three-point automatic seat belt on the rear central seat work correctly.
1)
When the front seats are adjusted to the rear position, their head restraints should be re-
moved before folding the backrests on the rear seats. Store the removed head restraints in
such a way that they cannot be soiled or damaged.
⇒ F ig. 73
located on
A
to unlock the backrest and fold it for-
B
is not visible.
C
CAUTION
Take care when handling the rear backrests so as not to damage the seat
1)
.
belts. The seat belt must never be left behind the lifted backrest.
Armrest on rear seats
The armrest can be folded away for greater comfort using the handle
⇒ F ig.
74.

Fig. 74 Rear seats: arm-
rest
