228
Fuses and bulbs
Changing bulbs
All bulbs can be changed easily in the bulb holder.
The bulbs are secured with a bayonet fastener. The table below
gives an overview of the bulb positions.
– Lightly press the defective bulb into the bulb holder, then turn it
anti-clockwise and remove it.
– Fit the new bulb, pressing it into the bulb holder and turn it
clockwise as far as it will go.
– Use a cloth to remove any fingerprints from the glass part of the
bulb.
– Check that the new bulb works properly.
– Replace the bulb holder.
– Screw in the bulb holder using the four screws, turning them
clockwise.
Number of bulbs
Position:
Note
Check the condition of the seal. If damaged, a replacement can be acquired
from an Official Service.
Fig. 165 Position of the
bulbs in the bulb holder
⇒ F ig. 165
Bulb function
Turn signals: PY21W NA LL
A
Side lights-brake lights: P21/5W
B
Side lights: P21/5W
C