Seat Toledo 2014 Owner's Manual page 110

108 Lights and visibility
Set the windscreen wiper arms to the service position before
changing the blades.
Service position for changing wiper blades
– Close the bonnet.
– Switch the ignition on and off.
– Press the lever to position
screen wiper arms are set to the service position.
Taking off the wiper blade
– Lift the windscreen wiper arm away from the glass moving the
blade slightly in the direction of the arm – arrow
– Hold the top of the windscreen wiper arm with one hand.
– Unlock the catch
1
in the direction of arrow
Fitting the wiper blade
– Slide the blade fully until it clicks into position.
– Check that the wiper is correctly secured.
– Fold the windscreen wiper arm back down onto the glass.
– Switch the ignition on and press the lever to position
⇒ F ig. 65 ⇒ p age 106, the windscreen wiper arms are set to the
basic position.
⇒ F ig. 65 ⇒ p age 106, the wind-
4
A
with the other hand and remove the blade
.
B
Changing the rear window wiper blade*
⇒ F ig.
66. Taking off the wiper blade
– Lift the rear window wiper arm away from the glass moving the
blade slightly in the direction of the arm – arrow
– Hold the top of the rear window wiper arm with one hand.
– Unlock the catch
in the direction of arrow
Fitting the wiper blade
– Slide the blade fully until it clicks into position.
– Check that the wiper is correctly secured.
4
– Fold the rear window wiper arm back down onto the glass.

Fig. 67 Rear window
wiper blade
with the other hand and remove the blade
1
.
B
⇒ F ig.
67.
A
