Seat Toledo 2014 Owner's Manual page 226

224 Fuses and bulbs
Changing main beam headlight bulbs
– Raise the bonnet.
– Remove the protective cover.
– Remove connector
– Extract the bulb and fit the replacement so that it fits correctly
into the recess on the reflector.
– Installation involves all of the above steps in reverse sequence.
– Fit the protective cover. Make sure that the cover fits correctly
on the housing during the operation.
– Check whether the new bulb is working.
Fig. 154 Changing main
beam headlight bulbs
⇒ F ig. 154
by pulling outward.
1
Changing dipped beam headlight bulbs
– Turn the wheel for access to the wheel housing cover and re-
⇒ F ig.
move the cover 155.

– Remove the protective cover from the headlight
⇒ F ig. 156
– Remove connector
– Unclip the retainer spring
inwards.
Fig. 155 Changing dip-
ped beam headlight
bulbs: wheel housing
Fig. 156 Changing dip-
ped beam headlight
bulbs
⇒ F ig.
156.
by pulling outward.
1
⇒ F ig. 156
pressing clockwise and
2
