Seat Toledo 2014 Owner's Manual page 236

234 Description of the data
Vehicle identification data on the data sticker
Vehicle data sticker
⇒ F ig. 173
The vehicle data sticker
floor and is also attached to the Service Plan.
The following information is provided on the vehicle data sticker:
Vehicle identification number (VIN)
1
Vehicle model
2
Identifying letters of the gearbox/number of the original paint finish/In-
3
terior equipment number/engine power/engine identifying letter
Fig. 173 Data sticker
Fig. 174 Type plate
is located on the luggage compartment
Partial description of the vehicle
4
Weight in running order
5
Fuel consumption (in litres per/100 km (miles)) – urban/on the motor-
6
way/combined
Combined CO emissions (g/km (miles))
7
2
Type plate
⇒ F ig. 174
The type plate is located at the bottom of the front driver side
door pillar between the front and rear door.
The type plate indicates the following weights:
Total permitted weight of the vehicle when loaded
8
Maximum authorised weight of the vehicle with a trailer, when the vehi-
9
cle operates as a tractor
Maximum permitted load of the front axle
10
Maximum permitted load of the rear axle
11
Weight in running order
The weight in running order only has one approximate value. This value cor-
responds to the minimum operative weight of the vehicle without additional
equipment that increases its weight, i.e. air conditioning, spare wheel, tow-
ing bracket.
The weight in running order also includes 75 kg of the weight of the driver
and the service liquids, in addition to a fuel tank at 90 % capacity.
From the difference between the total permitted weight in running order the
approximate carrying capacity can be calculated ⇒
The carrying capacity must include:
● occupants
● all pieces of equipment and other weights
● roof loads incl. roof rack
.
