Seat Toledo 2014 Owner's Manual page 215

Before using the tyre repair kit
The following jobs must be performed before using the tyre repair
kit:
– If you have a flat tyre, stop the vehicle well away from moving
traffic. Stop on flat, solid ground.
– All vehicle occupants should leave the vehicle. Vehicle occu-
pants should waiting in a safe place, e.g. behind the roadside
crash barrier) while the wheel is being changed.
– Switch off the ignition and engage neutral or move the selector
lever on the automatic gearbox to position P.
– Apply the handbrake firmly.
– Check whether the tyre can be repaired using the tyre repair kit
⇒ p age 211.
– If towing a trailer, unhitch it.
– Take the tyre repair kit out of the luggage compartment.
⇒ F ig. 142
– Fix the sticker
2
where the driver will see it.
– Do not remove the foreign body, e.g. bolts or nails, from the
tyre.
– Unscrew the tyre valve cap.
– Using the valve extractor
it onto a clean surface (cloth, paper, etc.)
Safety First
⇒ p age 212 onto the dash panel
, unscrew the valve insert and place
1
Operating instructions
Filling and inflating the tyre
Filling the tyre
– Shake the tyre sealant can
ly several times.
– Attach the flexible filling hose
ing the can will be automatically pierced.
– Remove the cap from the flexible filling hose
open end as far as it will go into the tyre valve.
– Hold the can upside down and fill the complete contents of
10
the can into the tyre.
– Remove the empty can from the tyre.
– Screw the valve insert back into the tyre valve using the valve
extractor .
1
Inflating the tyre
– Screw the tyre filling hose
the tyre valve.
– Make sure that the bleed screw
– Start the vehicle engine and leave it running.
– Plug the connector into the 12-volt power socket.
9
– Turn the air compressor on with the switch
– Leave the air compressor running until the tyre pressure has

reached 2.0-2.5 bar (29-36 psi / 200-250 kPa). Max. operating
time for the compressor is 8 minutes ⇒
Practical Tips
Self-help
⇒ F ig. 142 ⇒ p age 212 thorough-
10
onto the can . The foil seal-
3
10
and insert the
3
⇒ F ig. 142 ⇒ p age 212 firmly onto
5
is closed.
7
.
8
!
Technical specifications
213
