Seat Toledo 2014 Owner's Manual page 225

● Before changing a bulb, make sure you have the correct new bulb.
● Do not touch the glass part of the bulb with your bare hands, use a cloth
or paper towel instead. Otherwise, the fingerprints left on the glass will va-
porise as a result of the heat generated by the bulb, they will be deposited
on the reflector and will impair its surface.
Double headlight bulbs
Installation position of double headlight bulbs
side light
A
main beam headlight
B
dipped beam headlight
C
turn signal light
D
daytime driving light
E
Safety First
Fig. 152 Main headlight
bulbs
Operating instructions
Changing side light bulbs

– Raise the bonnet.
– Remove the protective cover
– Remove the bulb holder
– Remove the bulb by pulling it out and fit the new one.
– Installation involves all of the above steps in reverse sequence.
– Fit the protective cover. Make sure that the cover fits correctly
on the housing during the operation.
– Check whether the new bulb is working.

Practical Tips
Fuses and bulbs
Fig. 153 Changing side
light bulbs
⇒ F ig.
153.
⇒ F ig. 153
by pulling it outwards.
1
Technical specifications
223
