Seat Toledo 2014 Owner's Manual page 173

– Hold the ball-headed bar from underneath
move manual regulator
of arrow .
3
– Turn the removed regulator fully in the direction of arrow
firmly hold it in this position.
– Remove the ball-headed bar from the clamping bush, pulling
downwards in the direction of arrow
The ball-headed bar should be placed in service position so that it
is ready to be inserted in the clamping bush ⇒ .
– Place the cover over the clamping bush
WARNING
● Never leave the ball-headed bar unsecured in the luggage compart-
ment. It could be damaged in the event of sudden braking, putting the
safety of passengers at risk!
● Never disassemble the ball-headed bar with the trailer still hitched.
CAUTION
● If you do not turn the manual regulator fully, it will return to its original
position when the ball-headed bar is removed. The manual regulator will be
stuck to the ball-headed bar and you will not be able to put it in the service
position. Therefore, before you assemble it again, you must place the ball-
headed bar in this position.
● When disassembling, place the cap on the clamp-type bulb holder's key
slot. You will thus prevent dirt from entering the key slot.
Safety First
⇒ F ig. 121
and re-
with your other hand in the direction
C
.
5
⇒ F ig.
114.
4
Operating instructions
Note
● Before disassembling the ball-headed bar, we recommend placing the
cover on the ball head.
and
4 ● Clean the ball-headed bar thoroughly before returning it to the on-board
toolbox.
Use and maintenance
Cover the clamping bush with the cap to prevent dirt from entering.
Before hooking on the trailer, check the ball head and, if necessary, lubri-
cate it with adequate lubricant.
Place the protective cover over the ball head when storing the bar. This way,
you will avoid getting the luggage compartment dirty.
If it gets dirty, clean and dry the clamping bush thoroughly with an appro-
priate product.
CAUTION
The top part of the clamping bush opening is lubricated. Be careful not to
remove this lubrication.
Practical Tips
Driving the vehicle with a trailer
Technical specifications
171

