Seat Toledo 2014 Owner's Manual page 214

212 Self-help
WARNING
● If you have a puncture in moving traffic, switch on the hazard warning
lights and place the warning triangle at the obligatory distance. Observe
the applicable local legal regulations. This is for your own safety and that
of other road users.
● If you have a flat tyre, stop the vehicle well away from moving traffic.
Choose a location that is as level and solid as possible.
● A tyre filled with sealant does not have the same performance proper-
ties as a conventional tyre.
● Do not drive faster than 80 km/h (50 mph).
● Avoid heavy acceleration, hard braking and fast cornering.
● Check the tyre pressure after 10 minutes of driving!
● The sealant is harmful to health and must be immediately rinsed from
affected skin.
For the sake of the environment
Used or out-of-date sealant must be disposed of in line with environmental
protection regulations.
Note
● Observe the instructions for use provided by the tyre repair kit manufac-
turer.
● A new can of sealant can be acquired from the selection of SEAT Original
Accessories.
● Change the tyre repaired using the tyre repair kit as soon as possible or
ask an Official Service about the possibility of repair.
Tyre repair kit components
The tyre repair kit includes the following parts:
An adapter to fit and remove the valve
1
Sticker indicating the speed: "max. 80 km/h" or "max. 50 mph"
2
Flexible filling hose with cap
3
Compressor
4
Flexible tyre inflating hose
5
Tyre pressure gauge
6
Air release screw
7
ON/OFF button
8
12 Volt cable connector ⇒ p age 122
9

Can of sealant
10
Spare valve
11
⇒ F ig. 142
The valve extractor
1
the valve insert. This is used to remove the valve insert from the tyre and to
replace it. This is also valid for the spare valve insert
Fig. 142 Tyre repair kit
components
has a slot in its lower end that fits onto
.
11
