Seat Toledo 2014 Owner's Manual page 66

64 Controls and displays
Operating range
The approximate operating range is indicated in kilometres (miles) on the
display. It shows how far the vehicle can travel with the available fuel using
the same driving conditions as a reference.
The operating range is calculated in sections of 10 kilometres (miles). When
the fuel gauge enters the reserve zone, the operating range is displayed in
sections of 5 kilometres (miles).
The operating range is calculated based on the fuel consumption during the
last 50 kilometres (miles). The operating range increases when driving in a
more economical manner.
When the memory is reset (after disconnecting the battery), the operating
range is calculated with a 10 litres per 100 km (miles) consumption and ad-
justs to represent the current driving style.
Distance
The display shows the distance you have covered since the memory was last
reset ⇒ p age 61. If you wish to measure the duration of a journey from a
specific moment, the memory must be deleted ⇒ p age 62.
The maximum value for both memories is 1999 km (miles), or 9999 km
(miles) in vehicles fitted with an informative display. The memory is reset if
this value is exceeded.
Average speed
The display shows the average speed in km/h (mph) calculated from the
last time the memory was reset ⇒ p age 61. If you wish to measure the aver-
age speed from a specific period, the memory must first be deleted
⇒ p age 62.
While driving the first 300 m after deleting the memory this value is not
shown on the display.
The value is updated regularly while the vehicle is in motion.
Driving speed
The current driving speed, the same as indicated on the speedometer, is
⇒ F ig. 31 ⇒ p age 57.
shown on the display
3
Oil temperature
If the oil temperature is lower than +50 °C (+122 °F) or if a fault appears on
the oil temperature control, in place of the temperature indication, the – –.–
sign is shown.
Speed warning
Adjust the speed limit while the vehicle is stopped
Depending on the equipment:
⇒ F ig. 34
– Press the lever's button
A
– Press the lever's button to activate the possibility of adjust-
B
ing the speed limit.
– Press the lever's button to select the required speed limit,
A
e.g. 50 km/h. The speed can be adjusted in 5 km/h intervals.
– Press the lever's button to confirm the selected speed limit
B
or wait several seconds until the adjustment is automatically
stored.
or
– Turn the right thumbwheel of the multifunction steering wheel
⇒ F ig. 35
and select Speed warning .
1
– Press the thumbwheel of the multifunction steering wheel to ac-
tivate the possibility of adjusting the speed limit.

to select Speed warning .
