Seat Toledo 2014 Owner's Manual page 120

118 Seats and storage
Rear shelf
The shelf can be removed if a large load is to be transported.
Removing the shelf
– Remove the straps from the shelf
– Remove the shelf from its housing
underneath between the supports.
Fig. 79 Removing the
shelf
Fig. 80 Removing the
shelf
⇒ F ig.
79.
1
by knocking it gently from
2
Fitting the shelf
– Place the shelf on the side supports on the trim.
– Adjust the shelf supports
3
the trim.
– Fit into place by knocking the top of the shelf gently between
the supports.
– Attach the straps to the tray.
1
WARNING
Do not place objects on the rear shelf that could endanger the vehicle oc-
cupants in case of a sudden braking manoeuvre or an accident.
CAUTION
● The rear shelf supports a maximum load of 1 kg.
● If handled incorrectly, the tray could bend on closing the rear lid and be-
come damaged or damage the trim. Follow the instructions below.
⇒ F ig. 80
– The shelf supports
3
supports .
2
– The size of the load must not exceed the height of the shelf.
– When open, the shelf must not be bent against the shelf seal.
– There must be no objects in the space between the open shelf and
the backrest of the rear seat.
Note
The shelf will lift when the rear lid is opened.
⇒ F ig. 80
to fit the supports
2
must be securely in place in the trim
in
