Resetting System Values - Avaya H.323 9608 Installing And Maintaining

Using Local Administrative Craft Options

Resetting system values

About this task
Note:
When updating Craft procedures from a touch screen deskphone, touching the line you want
to change or the applicable softkey produces the same result as selecting a line and pressing
the applicable softkey on a non-touch screen IP deskphone.
Use the following procedure to reset all system initialization values to the application software
default values.
Caution:
This procedure erases all static information, without any possibility of recovering the data.
Procedure
1. Select RESET VALUES from the Craft Local Procedures screen. The deskphone
2. Press Cancel to return to the Craft Procedures screen without resetting the
60 Installing and Maintaining Avaya IP Deskphone H.323 9608, 9611G, 9621G, and 9641G
displays the following text:
Press Reset to confirm.
deskphone.
Press Reset to start the deskphone reset.
The deskphone resets from the beginning of registration, which might take a few
minutes. The deskphone resets:
• All system values and system initialization values except AUTH and NVAUTH
to default values.
• The 802.1X ID and Password to their default values.
• Call server values to their defaults.
• Any entries in the Redial buffer.
• Do not affect user-specified data and settings like Contacts data or the
deskphone login and password. To remove this type of data, see
deskphone settings
Comments? infodev@avaya.com
on page 51.
Clearing the
August 2013