HART Loop Converter KFD2-HLC-Ex1.D(.**)
Configuration
The operating software and the necessary device and communication DTMs can be
downloaded from our internet page www.pepperl-fuchs.com (product search, enter
EN
PACTware). The manual "Installation and Configuration DTM Collection Conventional
Interface Introduction" guides you through the installation steps necessary to install the
software. The manual can be found on our internet page www.pepperl-fuchs.com (product
search, enter PACTware).
Note!
The configuration and operation of the device via software is not described in this manual.
4.2
Configuration via Keypad on the Device
Danger!
Explosion hazard from sparking when using operating elements
Using operating elements in a potentially explosive atmosphere can cause sparks that can
ignite the surrounding atmosphere.
Only use operating elements (e.g., switch, slider, button, etc.) in the absence of a
potentially explosive atmosphere.
Caution!
Fault in the plant
Changing the device data changes the device function.
Before entering new device data, make sure the plant is not endangered by changing the
device data.
26 - EN