Dismounting, Maintenance, And Repair - Pepperl+Fuchs KFD2-HLC-Ex1.D Series Manual

HART Loop Converter KFD2-HLC-Ex1.D(.**)

Dismounting, Maintenance, and Repair

6 Dismounting, Maintenance, and Repair
EN
Danger!
Explosion hazard from live wiring of circuits
If you connect or disconnect energized circuits in a potentially explosive atmosphere,
sparks can ignite the surrounding atmosphere.
Only connect or disconnect energized circuits in the absence of a potentially explosive
atmosphere.
Danger!
Danger to life from electric shock
Working on live parts at voltages higher than 50 V AC or 120 V DC can result in electric
shock.
1.
2.
3.
4.
Danger!
Danger to life from using damaged or repaired devices.
Using a defective or repaired device can compromise its function and its electrical safety.
•
•
•
56 - EN
De-energize the device.
Secure the circuit against reconnection.
Verify that the device is de-energized at all poles.
Provide protection from adjacent live parts, if present.
Do not use a damaged or polluted device.
The device must not be repaired, changed or manipulated.
If there is a defect, always replace the device with an original device from
Pepperl+Fuchs.