Pepperl+Fuchs KFD2-HLC-Ex1.D Series Manual page 36

HART Loop Converter KFD2-HLC-Ex1.D(.**)
Configuration
Changing the Custom Tag of HART Variables
1.
EN
2.
3.
4.
5.
6.
7.
8.
9.
10. Confirm your entry with OK.
Canceling the Value Input for HART Variables
You can cancel the value entry at any time.
Press the ESC button.
34 - EN
Select the HART variable for which you would like to change the custom tag.
Press the OK button.
Select the Custom Tag menu.
The device displays:
if a value has not been defined: the insert mark and the symbol 
If a value is defined: the insert mark on the first character, the following character, and
the symbol  .
To select one of eight possible positions for the insert mark before the symbol  , press
the  or  button.
Confirm your selection with OK.
The insert mark flashes.
To select a character, press the  or  button.
Confirm your entry with OK.
Repeat steps 4 and 7, until all characters have been entered. You can also define
spaces.
To select the symbol  , press the  or  button.
The new value for Custom Tag has been stored.