Pepperl+Fuchs KFD2-HLC-Ex1.D Series Manual page 17

HART Loop Converter KFD2-HLC-Ex1.D(.**)
Mounting and Installation
Danger!
Danger to life from electric shock
Working on live parts at voltages higher than 50 V AC or 120 V DC can result in electric
shock.
1. De-energize the device.
2. Secure the circuit against reconnection.
3. Verify that the device is de-energized at all poles.
4. Provide protection from adjacent live parts, if present.
The removable terminal blocks simplify connection and control cabinet construction
significantly. These terminal blocks offer adequate space for the connection of leads with
core cross-sections of up to 2.5 mm
coding pins so misconnection of terminal blocks are eliminated.
Connecting Circuits
1. Connect the field circuit.
2. Connect the control circuit.
2
(14 AWG). The terminal blocks are coded with red
EN
EN - 15