Pepperl+Fuchs KFD2-HLC-Ex1.D Series Manual page 21

HART Loop Converter KFD2-HLC-Ex1.D(.**)
Mounting and Installation
Connection KFD2-HLC-Ex1.D.2W
Danger!
Danger to life from electric shock
Working on live parts at voltages higher than 50 V AC or 120 V DC can result in electric
shock.
1. De-energize the device.
2. Secure the circuit against reconnection.
3. Verify that the device is de-energized at all poles.
4. Provide protection from adjacent live parts, if present.
The following connections are available:
• Terminals 10 to 12: output I (relay 1 (change-over contact))
• Terminals 16 to 18: output II (relay 2 (change-over contact))
• Terminals 7 to 9: output III, current output as source (7/8) or sink (7/9)
• Terminals 13 to 15: output IV, current output as source (13/14) or sink (13/15)
• Terminals 19 to 21: output V, current output as source (19/20) or sink (19/21)
• Terminals 22/24: connection of HART handheld
• Terminals 23/24: power supply 24 VDC
EN
EN - 19