Pepperl+Fuchs KFD2-HLC-Ex1.D Series Manual page 29

HART Loop Converter KFD2-HLC-Ex1.D(.**)
Configuration
Configuring the Device
Configure the device using the buttons on the front side. Use the , , ESC, and OK
buttons for navigation. The following chapters contain more detailed information about the
menus.
The navigation principle is shown using the following example:
Iout1
The menu items from the lowest menu level are outlined in bold.
OK →
Assignment
← ESC
▼ ▲
Characteristic
← ESC
▼ ▲
Start Value
← ESC
▼ ▲
End Value
← ESC
▼ ▲
Fault Current
← ESC
Lowest menu level
OK →
4 - 20 NE43
← ESC
EN
EN - 27