HART Loop Converter KFD2-HLC-Ex1.D(.**)
Configuration
4.2.3
Entering Numbers
At the lowest menu level of the Parameter menu, you have the option of selecting or
EN
entering a numerical value.
Selecting a Numerical Value
1.
2.
3.
4.
Entering a Numerical Value
1.
2.
3.
4.
30 - EN
OK →
Parameter
← ESC
← ESC
← ESC
Select the parameter for which you want to change the numerical value.
Press the OK button.
The current value flashes.
Select a value from the list of values using the and buttons.
The new value flashes. The value is not stored.
Confirm your selection with OK.
The new value does not flash. The value is stored.
Select the parameter where you want to enter the numerical value.
Press the OK button.
The current value flashes.
To change the value in steps, press the or button. or
To change the value more quickly, press and hold the or button.
The new value flashes. The value is not stored.
Confirm your selection with OK.
The new value is stored.
Current value, flashing
▼ ▲
↓
New value, flashing,
not stored
OK ↓
New value, not flashing,
stored