Pepperl+Fuchs KFD2-HLC-Ex1.D Series Manual page 30

HART Loop Converter KFD2-HLC-Ex1.D(.**)
Configuration
4.2.1 Parameterization Mode
After being switched on, the device is in display mode. If you have password protection
EN
enabled, you must enter the password every time you transition from display mode to
parameterization mode.
Calling up Parameterization Mode
Press the OK and ESC buttons simultaneously for approx. 1 second.
Exiting Parameterization Mode
1.
2.
28 - EN
Display mode
The device changes from display mode to parameterization mode.
Press the ESC once or multiple times. The number of times depends on which menu
level you are in.
The device changes from parameterization mode to display mode.
If you have not pressed a button for 10 minutes in parameterization mode, the device
switches back automatically to display mode.
parameterization mode
OK + ESC (simultaneously for 1 s) →
← ESC
Main menu
Unit
▼ ▲
HARTcom
▼ ▲
Output
▼ ▲
Service