HART Loop Converter KFD2-HLC-Ex1.D(.**)
Configuration
You can implement the following applications:
•
EN
•
•
•
The exact switching characteristics of the device are shown in the following illustration:
Figure 4.2
46 - EN
Switching direction max, direction of operation active: alarm if there is a
limit value overrange, e. g., sounder on
Switching direction max, direction of operation passive: switch off during
limit value overrange, e. g., pump, heating, ... off, for larger hysteresis Min-Max
operation (pump, heater, ... on/off)
Switching direction min, direction of operation active: alarm if there is a
limit value underrange, e. g., sounder is on.
Switching direction min, direction of operation passive: switch off during
limit value underrange, e. g., pump, heating, ... off, for larger hysteresis Min-Max
operation (pump, heater, ... off/on)
Value
Max
Max – hysteresis
Min + hysteresis
Min
Switching direction max, mode active:
energized
de-energized
Switching direction max, mode passive:
energized
de-energized
Switching direction min, mode active:
energized
de-energized
Switching direction min, mode passive:
energized
de-energized
Time