Pepperl+Fuchs KFD2-HLC-Ex1.D Series Manual page 33

HART Loop Converter KFD2-HLC-Ex1.D(.**)
Configuration
4.2.4 Entering Floating Point Figures
At the lowest menu level of the Parameter menu, you have the option of entering floating
point figures.
The floating point figures can have the following structure:
Positive number
43210000
4321000
432100
43210
4321
432.1
43.21
1.234
0.1234
0.01234
0.001234
0.0001234
Table 4.1
For a floating point figure, you must enter the following parameters:
• four digits of the mantissa (decimals) for positive numbers
• a minus sign and three digits for the mantissa for negative numbers
• the position of the decimal point in or after the mantissa
• the exponents
Input Negative number
43.21 E06
4321 E03
432.1 E03
43.21 E03
4321 E00
432.1 E00
43.21 E00
1.234 E00
123.4 E-03
12.34 E-03
1.234 E-03
123.4 E-06
-3210000
-321000
-32100
-3210
-321
-32.1
-3.21
-0.123
-0.0123
-0.00123
-0.000123
EN
Input
-3.21 E06
-321 E03
-32.1 E03
-3.21 E03
-321 E00
-32.1 E00
-3.21 E00
-123 E-03
-12.3 E-03
-1.23 E-03
-123 E-06
EN - 31