Pepperl+Fuchs KFD2-HLC-Ex1.D Series Manual page 9

HART Loop Converter KFD2-HLC-Ex1.D(.**)
Product Specifications
1 Removable terminals, blue
2 LC display
3 Keypad


ESC
OK
4 Place for labeling
5 Removable terminals, green
6 Programming socket
7 yellow LEDs
8 red LEDs
9 green LEDs
Display for showing
• the measured values
• the current output values
• the fault messages
• the parameterization mode
Four keys for selecting the displayed values, the current output
values and for setting the parameters of the device
Up
Down
Escape
Confirmation
Interface for connecting a computer for parameterization and
diagnostics of the device with the PACTware operating
software, using the K-ADP-USB adapter
Outputs Out 1 to 4, indicating relay status
Indicating faults
Indicating power supply
EN
EN - 7